Fendt Tigo MS/MR/MR Profi silage trailers

Automatic all Fendt Tigo The model collector increases your trailer's efficiency. Five rows of tines with a working width of 1.80 m ensure maximum collection power. Due to the very closely spaced 54 mm spring tines, Fendt Tigo The series guarantees optimal raking and optimal feed transfer to the loader when harvesting even short, dry grass.

• MS: 4 models tinka vidutinių arklio galių, skirtų svyruojančiai svirčiai. MS krautuvai turi valdomą rotoriaus paskirstymo konvejerio kelią, 5 svyruojančias svirtis, iki 33 peilių, 38 mm pjovimo ilgio.
• MR: 3 models Suitable for medium-horsepower rotary mower. 6-rotor tedder, up to 31 tines, 45mm working width.
• MR Profi: 3 models tinka vidutinių arklio galio Profi Profi models have a multifunctional partition with VarioFill Automated loading and unloading system.

Tigo MR Profi compact construction:

• Very stable, strong, compact construction;
• MR 100 Profi Designed as a professional silage trailer with 50 DIN m³ lifting capacity;
• Due to the installed partition, an additional 5 m² can be utilised.³ In the space above the charger;
• Approximately 1 metre shorter than similar combination trailers.;
• Very large payload and capacity;
• Great team – advanced, lightweight constructions Fendt

Variable compact design Fendt Tigo to its maximum useful load.

Tigo MR:

• Entry-level trailer for rotor trailers in its class;
• Sturdy construction;
• Strong partition;
• 2-speed automatic loading system.

Tigo MS:

• Very stable, strong, compact construction;
• High-capacity trailer with a particularly soft-operating pendulum axle;
• Strong partition;
• 2-speed automatic loading system.

Swinging pick

• Unique construction in all M models;
• Copying and rotating the terrain surface Tigo rotating disc harrow. This means greater harrow disc contact with the soil surface compared to other manufacturers' mechanisms which swing left or right;
• When loosening or tightening the bolts, you can alter the clamping connection between the receiver grille and the reinforcement section;
• MS – the only trailer on the market with an oscillating drawbar and a fully equipped pick-up;
• MS – the widest range of rocking levers in its category.

Narrow cutting gap

• 6-point rotor with a narrow cutting gap;
• 25 mm rotor needle contact surface;
• Overall needle width Mr/Mrs Profi – 800 mm;
• Rotor diameter 800 mm;
• The combination of a narrow cutting gap and wide rotor tines ensures excellent cutting quality and a smooth, precise cut.;
• Even if the grass along the length gets caught in the bristles, it has no room to slip left or right and is actively drawn in by the table;
• A large contact surface means that even if the material is wet and heavy, the feed does not become „mushy“;
• Meticulous feed management to ensure the best feed quality.

Rotor needles are being replaced:

• Patented solution for the replacement of individual rotor segments.

Mr. Forklift

Unique traction system:

• The device is driven by a power transmission that can withstand variable loads much better than a chain drive;
• Central, robust, wear-resistant and direct drive for the pendulum arm block;
• Central tube only for bearings;
• Requires less maintenance than a chain;
• Very smooth work.

Mr 1/4 table

• MR / MR Profi 31 knife;
• Potential cutting length 45 mm;
• Half knife set 90 mm;
• It's easy to change the cutting length using the levers.

Tool bit dressing

• Comfortable and tool-free;
• Slide the knives from the operated to the service position via the terminal or button.

Quick blade change:

1. Tilt the group of knives to the side;
2. Loosen the knives:

• Release the rear brake
• Rotate the tool 180° clockwise

3. Each knife can be removed separately.

MR Profi Automatic Charging

Multifunctional partition

• Unique, multifunctional partition with a combination of pressure sensors and hydraulic cylinders Mr Profi;
• 5 m³ more DIN volume due to utilisation of space above the loader;
• More compact, lightweight, manoeuvrable and around 1m shorter than a trailer of similar load volume:
• Approximately an 80° turn from the front right to the rear right.
• Three ball bearings in the lower cross member
• Moved using 2 hydraulic cylinders with integrated pressure sensors
• Special container construction → Patented bunker construction.
• It works the same way as the integrated ones VarioFill automatic loading and unloading system compression plate.

Supply rollers

• At all times Tigo MR/MS (now MS 60/MS 70) Series trailers can be fitted with supply rollers as optional equipment.;
• 2 or 3 rolls.

Unique axle design:

• Forklift block, adapted to the vehicle chassis;
• Available from 500/50-17 to 710/35-R22.5 (MS); from 500/50-17 to 710/40-R22.5 (MR) tyre options MS/MR.