Rolland RF6118
Year of manufacture: 2021
Length / width / height (m): 6.10 / 1.46 base and 1.81 top / 1.55
Bottom thickness / wall thickness (mm): 4 / 4
Overall length (m): 8.67
Loading height (m): 2.80
Mass (t): 6.4
Maximum payload (t): 16000 kg
Volume (m³): 18
Volume with risers: 18 cm risers, volume 20.4 m³
Conveyor chain (mm): 2×16 welded
Transporter
Axis square (mm): 110×110 (widened and reinforced at load points)
Chassis type: Single axle
Tyres 900/60 R42
Brakes, service/parking: Pneumatic/mechanical
Belaipsnis transporterio eigos reguliavimas
Gearbox drive: Two-wheel drive (both sides)
Control computer: ROLLCONTROL regulation computer. All spreader functions are managed via the control terminal. Dynamic scales for weighing, precise spreading according to driving speed. Large information touchscreen display. The screen displays: tractor speed, current spreading material weight, spreading disc and chopping rotor speed, spreading width, tonnes spread, hectares covered, hours worked. Option to integrate with GPS receiver and yield maps. Spreading accuracy from 700 kg/ha to 40 t/ha.
Working with land survey maps: Loading maps from a USB drive
The mass feed rate is regulated according to the GPS signal and the actual driving position.
ISOBUS connection: ISOBUS cable (connects to the tractor terminal)
Sensors: Transporter drive sensor – external. Spreading discs sensor – external. Horizontal shredding rotor sensor – mounted in the gearbox
Amortising Type A tow hitch
Suspension spring damping
Hitching loop: Swivel 55 mmØ
Lighting
Parking leg: Hydraulic jack
Semi-automatic circuit stretching
Semi-liquid manure slurry
Hydraulic valve at the back
Hydraulic valve height indicator
Shredding rotors: TCEi system: two horizontal rotors with shredding blades (the most aggressive shredding mechanism on the market) shred the material to an extremely high quality and drop it onto two spreading discs. The bladed spreading discs evenly distribute the material.
Mulching rotor diameter / revolutions: 700mm / 296 rpm.
Disc diameter / revolutions: 930mm / 423 rpm.
GTV centrifuge: 1000 rpm wide-angle with slip clutch
Power supply system: The entire power supply system is routed through the GTV shafts and the gear system (SIP beveloid sun gears)
Working width (m): 10 – 24 (depending on spreadable material)
Metal processing: Seven-stage painting (unique on the market)
Tractor power required: From 170 HP (optimal operation with a tractor of 200 HP)
Required oil flow: Not less than 70 l/min.
One hydraulic pair
Tel: +37061277114
